|
AGX Dynamics 2.42.3.1
|
Container for model-level configuration parameters. More...
#include <TerrainWheelSettings.h>
Inheritance diagram for agxTerrain::TerrainWheelSettings:Public Types | |
| enum | DebugOption : agx::UInt32 { PRINT_GENERAL_INFO = 1 << 0 , RENDER_REGRESSION_PLANES = 1 << 1 , PRINT_SIMULATION_STAGES = 1 << 2 , PRINT_CONTACT_EVENT_INFO = 1 << 3 , PRINT_BOUNDS_INFO = 1 << 4 } |
| Debug options for info prints and additional render options. More... | |
| enum class | PressureSinkageModel { BEKKER = 0 , REECE = 1 } |
Public Member Functions | |
| AGXSTREAM_DECLARE_SERIALIZABLE_BASE (agxTerrain::TerrainWheelSettings) | |
| agx::Real | getAngularIntegrationStep () const |
| Get the angular integration step size. | |
| bool | getDebugOption (DebugOption option) const |
| Check whether a specific debug option is enabled. | |
| bool | getEnableComputeMaximumNormalStressAngleFromFrontAngle () const |
| bool | getEnableComputeRearAngleFromFrontAngle () const |
| bool | getEnableDebugBoundsInfo () const |
| Check whether bounds debug printing is enabled. | |
| bool | getEnableDebugContactEventInfo () const |
| Check whether contact event debug printing is enabled. | |
| bool | getEnableDebugGeneralInfo () const |
| Check whether general debug information printing is enabled. | |
| bool | getEnableDebugRegressionPlanes () const |
| Check whether debug regression plane rendering is enabled. | |
| bool | getEnableDebugSimulationStages () const |
| Check whether simulation stage debug printing is enabled. | |
| PressureSinkageModel | getPressureSinkageModel () const |
| Get the currently selected pressure-sinkage model. | |
| agx::Real | getRearAndFrontAngleMaxMagnitude () const |
| Get the maximum allowed magnitude for the rear and front contact angles. | |
| agx::Real | getRollingModeOmegaYThreshold () const |
| Return the wheel axle angular velocity magnitude threshold used to suppress rolling-mode classification. | |
| agx::Real | getRollingModeVxAngularEquivalentThreshold () const |
| Return the longitudinal velocity threshold expressed as an angular-equivalent velocity used for rolling-mode classification. | |
| agx::Real | getSlipAngleFallbackValue () const |
| Return the slip angle fallback value when both the vX and vY magnitudes are below their thresholds. | |
| agx::Real | getSlipAngleMaxMagnitude () const |
| Return the maximum allowed slip angle magnitude. | |
| agx::Real | getSlipAngleVxAngularEquivalentThreshold () const |
| Return the longitudinal velocity angular equivalent threshold used by the slip-angle computation. | |
| agx::Real | getSlipAngleVyAngularEquivalentThreshold () const |
| Return the lateral velocity dead-zone angular equivalent threshold used by the slip-angle computation. | |
| agx::Real | getSlipRatioFallbackValue () const |
| Return the slip ratio fallback value when the magnitudes of both the angular equivalent of vX and omegaY are below their thresholds. | |
| agx::Real | getSlipRatioMaxMagnitude () const |
| Return the maximum allowed magnitude of the computed slip ratio. | |
| agx::Real | getSlipRatioOmegaYThreshold () const |
| Return the wheel axle angular velocity magnitude threshold used to suppress slip-ratio computation. | |
| agx::Real | getSlipRatioSmoothingAngularSpeed () const |
| Return the minimum velocity scale used to stabilize slip-ratio computation. | |
| agx::Real | getSlipRatioVxAngularEquivalentThreshold () const |
| Return the longitudinal velocity threshold expressed as an angular-equivalent velocity used for slip-ratio computations. | |
| void | setAngularIntegrationStep (agx::Real angularIntegrationStep) |
| Set the angular integration step size used by the TerrainWheel model. | |
| void | setDebugOption (DebugOption option, bool enable) |
| Enable or disable a specific debug option. | |
| void | setEnableComputeMaximumNormalStressAngleFromFrontAngle (bool enable) |
| Enable or disable computation of the maximum normal stress angle from the front contact angle. | |
| void | setEnableComputeRearAngleFromFrontAngle (bool enable) |
| Enable or disable computation of the rear contact angle from the front contact angle. | |
| void | setEnableDebugBoundsInfo (bool enable) |
| Enable or disable bounds info debug prints. | |
| void | setEnableDebugContactEventInfo (bool enable) |
| Enable or disable contact event info debug prints. | |
| void | setEnableDebugGeneralInfo (bool enable) |
| Enable or disable general debug prints. | |
| void | setEnableDebugRegressionPlanes (bool enable) |
| Enable or disable debug rendering of regression planes. | |
| void | setEnableDebugSimulationStages (bool enable) |
| Enable or disable simulation stage debug prints. | |
| void | setPressureSinkageModel (PressureSinkageModel pressureSinkageModel) |
| Set the pressure-sinkage model used by the TerrainWheel model. | |
| void | setRearAndFrontAngleMaxMagnitude (agx::Real maxMagnitude) |
| Set the maximum allowed magnitude for the rear and front contact angles. | |
| void | setRollingModeOmegaYThreshold (agx::Real omegaYThreshold) |
| Set the threshold for the wheel axle angular velocity magnitude used to suppress rolling-mode classification from noisy low-speed kinematics. | |
| void | setRollingModeVxAngularEquivalentThreshold (agx::Real vXAngEquivThreshold) |
| Set the threshold for the longitudinal wheel velocity expressed as an angular-equivalent velocity used to suppress rolling-mode classification from noisy low-speed kinematics. | |
| void | setSlipAngleFallbackValue (agx::Real fallbackValue) |
| Set the fallback slip angle value when both vX and vY magnitudes are below their thresholds. | |
| void | setSlipAngleMaxMagnitude (agx::Real maxMagnitude) |
| Set the maximum allowed slip-angle magnitude. | |
| void | setSlipAngleVxAngularEquivalentThreshold (agx::Real vXAngEquivThreshold) |
| Set the longitudinal velocity angular equivalent threshold used by the slip-angle computation. | |
| void | setSlipAngleVyAngularEquivalentThreshold (agx::Real vYAngEquivThreshold) |
| Set the lateral velocity dead-zone angular equivalent threshold used by the slip-angle computation. | |
| void | setSlipRatioFallbackValue (agx::Real fallbackValue) |
| Set the fallback slip ratio value when both the vX and omegaY magnitudes are below their respective thresholds. | |
| void | setSlipRatioMaxMagnitude (agx::Real maxMagnitude) |
| Set the maximum allowed magnitude of the computed slip ratio. | |
| void | setSlipRatioOmegaYThreshold (agx::Real omegaYThreshold) |
| Set the threshold for the wheel axle axis angular velocity magnitude used to suppress slip-ratio computations. | |
| void | setSlipRatioSmoothingAngularSpeed (agx::Real smoothingAngularSpeed) |
| Set the minimum velocity scale used to smooth slip-ratio computations. | |
| void | setSlipRatioVxAngularEquivalentThreshold (agx::Real vXAngEquivThreshold) |
| Set the threshold for the longitudinal wheel velocity expressed as an angular-equivalent velocity used to suppress slip-ratio computations. | |
Public Member Functions inherited from agx::Referenced | |
| Referenced () | |
| Default constructor. | |
| Referenced (const Referenced &) | |
| template<typename T > | |
| T * | as () |
| Subclass casting. | |
| template<typename T > | |
| const T * | as () const |
| template<typename T > | |
| T * | asSafe () |
| Safe subclass casting, return nullptr if template type does not match. | |
| template<typename T > | |
| const T * | asSafe () const |
| int | getReferenceCount () const |
| template<typename T > | |
| bool | is () const |
| Subclass test. | |
| Referenced & | operator= (const Referenced &) |
| Assignment operator. Will increment the number of references to the referenced object. | |
| void | reference (void *ptr=nullptr) const |
| Explicitly increment the reference count by one, indicating that this object has another pointer which is referencing it. | |
| void | unreference (void *ptr=nullptr) const |
| Decrement the reference count by one, indicating that a pointer to this object is referencing it. | |
| void | unreference_nodelete () const |
| Decrement the reference count by one, indicating that a pointer to this object is referencing it. | |
Public Member Functions inherited from agxStream::Serializable | |
| virtual | ~Serializable () |
| Destructor for normal C++ use but hidden from SWIG bindings. | |
| virtual const char * | getClassName () const |
| bool | getEnableSerialization () const |
| bool | getEnableUuidGeneration () |
| agx::UInt32 | getIndex () const |
| This index is given at creation of this object. | |
| virtual StorageAgent * | getStorageAgent () const =0 |
| agx::Uuid | getUuid () const |
| bool | isFinished () const |
| void | setEnableSerialization (bool flag) |
| Set to false to disable serialization of this object. | |
| void | setFinished () |
| Tells this class that it is restored correctly and should not be deleted during destruction of an Archive. | |
| void | setUuid (const agx::Uuid &uuid) |
| Explicitly set a Uuid on a serializable object. | |
Static Public Member Functions | |
| static agxStream::Serializable * | create (agxStream::InputArchive &) |
Static Public Member Functions inherited from agx::Referenced | |
| template<typename T > | |
| static bool | ValidateCast (const Referenced *object) |
Static Public Member Functions inherited from agxStream::Serializable | |
| static void | setEnableUuidGeneration (bool flag) |
| Specify if there should be UUID:s generated for each new Serializable object. By default it is enabled. | |
Additional Inherited Members | |
Protected Member Functions inherited from agx::Referenced | |
| virtual | ~Referenced () |
| Destructor. | |
| void | allocateObserverVector () const |
| void | deleteUsingDeleteHandler () const |
Protected Member Functions inherited from agxStream::Serializable | |
| Serializable () | |
| Default constructor. | |
| Serializable (const Serializable &other) | |
| Copy constructor. | |
| void | generateUuid () |
Static Protected Member Functions inherited from agx::Referenced | |
| static DeleteHandler * | getDeleteHandler () |
| static void | setDeleteHandler (DeleteHandler *handler) |
| Internal: Set a DeleteHandler to which deletion of all referenced counted objects will be delegated to. | |
Container for model-level configuration parameters.
TerrainWheelSettings groups tunable parameters that affect how the TerrainWheel model computes quantities.
The parameters stored here are typically set during model initialization or configuration and are used internally by the TerrainWheel during simulation steps.
Definition at line 39 of file TerrainWheelSettings.h.
Debug options for info prints and additional render options.
Definition at line 506 of file TerrainWheelSettings.h.
|
strong |
| Enumerator | |
|---|---|
| BEKKER | |
| REECE | |
Definition at line 67 of file TerrainWheelSettings.h.
| agxTerrain::TerrainWheelSettings::AGXSTREAM_DECLARE_SERIALIZABLE_BASE | ( | agxTerrain::TerrainWheelSettings | ) |
|
inlinestatic |
Definition at line 593 of file TerrainWheelSettings.h.
| agx::Real agxTerrain::TerrainWheelSettings::getAngularIntegrationStep | ( | ) | const |
Get the angular integration step size.
|
inline |
Check whether a specific debug option is enabled.
Definition at line 531 of file TerrainWheelSettings.h.
| bool agxTerrain::TerrainWheelSettings::getEnableComputeMaximumNormalStressAngleFromFrontAngle | ( | ) | const |
| bool agxTerrain::TerrainWheelSettings::getEnableComputeRearAngleFromFrontAngle | ( | ) | const |
|
inline |
Check whether bounds debug printing is enabled.
Definition at line 591 of file TerrainWheelSettings.h.
|
inline |
Check whether contact event debug printing is enabled.
Definition at line 579 of file TerrainWheelSettings.h.
|
inline |
Check whether general debug information printing is enabled.
Definition at line 543 of file TerrainWheelSettings.h.
|
inline |
Check whether debug regression plane rendering is enabled.
Definition at line 555 of file TerrainWheelSettings.h.
|
inline |
Check whether simulation stage debug printing is enabled.
Definition at line 567 of file TerrainWheelSettings.h.
| PressureSinkageModel agxTerrain::TerrainWheelSettings::getPressureSinkageModel | ( | ) | const |
Get the currently selected pressure-sinkage model.
| agx::Real agxTerrain::TerrainWheelSettings::getRearAndFrontAngleMaxMagnitude | ( | ) | const |
Get the maximum allowed magnitude for the rear and front contact angles.
The computed front (theta_f) and rear (theta_r) contact angles are clamped to the interval [-maxMagnitude, maxMagnitude] to avoid extreme values.
| agx::Real agxTerrain::TerrainWheelSettings::getRollingModeOmegaYThreshold | ( | ) | const |
Return the wheel axle angular velocity magnitude threshold used to suppress rolling-mode classification.
If both the wheel-frame longitudinal velocity |vX| (evaluated via its angular equivalent) and angular velocity |omegaY| are below their respective thresholds, the rolling mode is set to the default rolling mode instead of being determined from the comparison between |R * omegaY| and |vX|.
| agx::Real agxTerrain::TerrainWheelSettings::getRollingModeVxAngularEquivalentThreshold | ( | ) | const |
Return the longitudinal velocity threshold expressed as an angular-equivalent velocity used for rolling-mode classification.
The threshold corresponds to |vX| / R [rad/s]. The equivalent linear velocity threshold is |vX| < threshold * R.
If both the wheel-frame longitudinal velocity |vX| (evaluated via its angular equivalent) and angular velocity |omegaY| are below their respective thresholds, the rolling mode is set to the default rolling mode instead of being determined from the comparison between |R * omegaY| and |vX|.
| agx::Real agxTerrain::TerrainWheelSettings::getSlipAngleFallbackValue | ( | ) | const |
Return the slip angle fallback value when both the vX and vY magnitudes are below their thresholds.
| agx::Real agxTerrain::TerrainWheelSettings::getSlipAngleMaxMagnitude | ( | ) | const |
Return the maximum allowed slip angle magnitude.
| agx::Real agxTerrain::TerrainWheelSettings::getSlipAngleVxAngularEquivalentThreshold | ( | ) | const |
Return the longitudinal velocity angular equivalent threshold used by the slip-angle computation.
| agx::Real agxTerrain::TerrainWheelSettings::getSlipAngleVyAngularEquivalentThreshold | ( | ) | const |
Return the lateral velocity dead-zone angular equivalent threshold used by the slip-angle computation.
| agx::Real agxTerrain::TerrainWheelSettings::getSlipRatioFallbackValue | ( | ) | const |
Return the slip ratio fallback value when the magnitudes of both the angular equivalent of vX and omegaY are below their thresholds.
| agx::Real agxTerrain::TerrainWheelSettings::getSlipRatioMaxMagnitude | ( | ) | const |
Return the maximum allowed magnitude of the computed slip ratio.
| agx::Real agxTerrain::TerrainWheelSettings::getSlipRatioOmegaYThreshold | ( | ) | const |
Return the wheel axle angular velocity magnitude threshold used to suppress slip-ratio computation.
If both the wheel-frame longitudinal velocity |vX| (evaluated via its angular equivalent) and angular velocity |omegaY| are below their respective thresholds, the slip ratio is set to the fallback value (see computeSlipRatio()).
| agx::Real agxTerrain::TerrainWheelSettings::getSlipRatioSmoothingAngularSpeed | ( | ) | const |
Return the minimum velocity scale used to stabilize slip-ratio computation.
| agx::Real agxTerrain::TerrainWheelSettings::getSlipRatioVxAngularEquivalentThreshold | ( | ) | const |
Return the longitudinal velocity threshold expressed as an angular-equivalent velocity used for slip-ratio computations.
The threshold corresponds to |vX| / R [rad/s]. The equivalent linear velocity threshold is |vX| < threshold * R.
If both the wheel-frame longitudinal velocity |vX| (evaluated via its angular equivalent) and angular velocity |omegaY| are below their respective thresholds, the slip ratio is set to the fallback value (see computeSlipRatio()).
| void agxTerrain::TerrainWheelSettings::setAngularIntegrationStep | ( | agx::Real | angularIntegrationStep | ) |
Set the angular integration step size used by the TerrainWheel model.
This step (in radians) is the increment used when numerically integrating quantities over the wheel contact interval (typically from rear_angle to front_angle). Smaller values generally improve accuracy but increase computational cost.
Invalid values are rejected and reported with LOGGER_WARNING.
| angularIntegrationStep | Angular integration step size [rad] |
|
inline |
Enable or disable a specific debug option.
Definition at line 525 of file TerrainWheelSettings.h.
| void agxTerrain::TerrainWheelSettings::setEnableComputeMaximumNormalStressAngleFromFrontAngle | ( | bool | enable | ) |
Enable or disable computation of the maximum normal stress angle from the front contact angle.
If enabled, the maximum normal stress theta_m is computed according to theta_m = (a_0 + a_i * slip_ratio) * theta_f, where a_0, a_1 are constants, and theta_f is front angle.
If disabled, theta_m is computed according to theta_m = 0.5 * (theta_r + theta_f), where theta_r (theta_f) is rear angle (front angle)
| enable | True to compute theta_r from theta_f, false to use the default rear-angle update. |
| void agxTerrain::TerrainWheelSettings::setEnableComputeRearAngleFromFrontAngle | ( | bool | enable | ) |
Enable or disable computation of the rear contact angle from the front contact angle.
When enabled, the rear contact angle theta_r is not computed from the wheel-terrain geometry directly. Instead it is derived from the current front contact angle theta_f using an empirical slip-dependent relation (see computeRearAngleFromFrontAngle()). This can be useful when a simplified or more stable trailing-edge estimate is desired.
| enable | True to compute theta_r from theta_f, false to use the default rear-angle update. |
|
inline |
Enable or disable bounds info debug prints.
Definition at line 585 of file TerrainWheelSettings.h.
|
inline |
Enable or disable contact event info debug prints.
Definition at line 573 of file TerrainWheelSettings.h.
|
inline |
Enable or disable general debug prints.
Definition at line 537 of file TerrainWheelSettings.h.
|
inline |
Enable or disable debug rendering of regression planes.
Definition at line 549 of file TerrainWheelSettings.h.
|
inline |
Enable or disable simulation stage debug prints.
Definition at line 561 of file TerrainWheelSettings.h.
| void agxTerrain::TerrainWheelSettings::setPressureSinkageModel | ( | PressureSinkageModel | pressureSinkageModel | ) |
Set the pressure-sinkage model used by the TerrainWheel model.
Selects which semi-empirical relation is used to compute normal pressure as a function of sinkage. Currently supported models are "Bekker" and "Reece". In the "Bekker" model, the pressure is written on the form
p = (k_c/b + k_phi) * z^n,
while in the "Reece" model, the pressure is written on the form
p = (c*k_c' + rho*g*b*k_phi') * (z/b)^n.
| pressureSinkageModel | Enum to choose pressure sinkage model, see PressureSinkageModel. |
| void agxTerrain::TerrainWheelSettings::setRearAndFrontAngleMaxMagnitude | ( | agx::Real | maxMagnitude | ) |
Set the maximum allowed magnitude for the rear and front contact angles.
The computed front (theta_f) and rear (theta_r) contact angles are clamped to the interval [-maxMagnitude, maxMagnitude] to avoid extreme values.
| maxMagnitude | Maximum absolute value allowed for theta_f and theta_r [rad] |
| void agxTerrain::TerrainWheelSettings::setRollingModeOmegaYThreshold | ( | agx::Real | omegaYThreshold | ) |
Set the threshold for the wheel axle angular velocity magnitude used to suppress rolling-mode classification from noisy low-speed kinematics.
If both:
| omegaYThreshold | Threshold for |omegaY| [rad/s]. Must be >= 0. |
| void agxTerrain::TerrainWheelSettings::setRollingModeVxAngularEquivalentThreshold | ( | agx::Real | vXAngEquivThreshold | ) |
Set the threshold for the longitudinal wheel velocity expressed as an angular-equivalent velocity used to suppress rolling-mode classification from noisy low-speed kinematics.
The longitudinal velocity vX is converted to an angular equivalent by dividing by the wheel radius R, i.e. |vX| / R.
If both:
The corresponding linear velocity threshold is: |vX| < vXAngEquivThreshold * R
| vXAngEquivThreshold | Threshold for |vX| / R [rad/s]. Must be >= 0. |
| void agxTerrain::TerrainWheelSettings::setSlipAngleFallbackValue | ( | agx::Real | fallbackValue | ) |
Set the fallback slip angle value when both vX and vY magnitudes are below their thresholds.
The lateral force due to shear stress is zero when tan(slip angle) is zero, i.e. when slip angle is zero. The lateral force due to bulldozing is zero when sin(slip angle) is zero, i.e. when slip angle is zero. When vX and vY are small, the slip angle computation is unreliable due to e.g. noise, so when vX and vY are below their thresholds, the slip angle is set to fallbackValue. If fallbackValue is set to zero, and vX and vY are below their thresholds, the lateral force constraint limit is zero, disabling the possibility to produce a lateral force. This can be an issue e.g. when a wheel should be stationary at a (very) small incline, but drifts laterally. Therefore, it is recommended that fallbackValue is set to some non-zero value.
Invalid values are rejected and reported with LOGGER_WARNING.
| fallbackValue | Fallback slip angle value [rad] |
| void agxTerrain::TerrainWheelSettings::setSlipAngleMaxMagnitude | ( | agx::Real | maxMagnitude | ) |
Set the maximum allowed slip-angle magnitude.
The computed slip angle is clamped to +/- this value to avoid unrealistic angles and to improve numerical stability.
Invalid values are rejected and reported with LOGGER_WARNING.
| maxMagnitude | Maximum allowed slip angle magnitude (clamp) [rad] |
| void agxTerrain::TerrainWheelSettings::setSlipAngleVxAngularEquivalentThreshold | ( | agx::Real | vXAngEquivThreshold | ) |
Set the longitudinal velocity angular equivalent threshold used by the slip-angle computation.
When computing the wheel slip angle (atan2(vY, vX)), a small |vX| can cause numerical noise and discontinuities around vX = 0. This threshold is used to stabilize/clamp vX away from zero in that regime.
The longitudinal velocity angular equivalent threshold is vXAngEquivThreshold * radius.
The value must be >= 0.
| vXAngEquivThreshold | Threshold for the angular equivalent of |vX| below which vX is stabilized away from zero [m/s] |
| void agxTerrain::TerrainWheelSettings::setSlipAngleVyAngularEquivalentThreshold | ( | agx::Real | vYAngEquivThreshold | ) |
Set the lateral velocity dead-zone angular equivalent threshold used by the slip-angle computation.
Small lateral velocities are treated as noise and suppressed when computing the slip angle. This threshold defines the |vY| below which vY is considered zero.
The lateral velocity angular equivalent threshold is vYAngEquivThreshold * radius.
The value must be >= 0.
| vYAngEquivThreshold | Threshold for the angular equivalent of |vY| below which lateral velocity noise is suppressed [m/s] |
| void agxTerrain::TerrainWheelSettings::setSlipRatioFallbackValue | ( | agx::Real | fallbackValue | ) |
Set the fallback slip ratio value when both the vX and omegaY magnitudes are below their respective thresholds.
Invalid values are rejected and reported with LOGGER_WARNING.
| fallbackValue | Fallback slip ratio value [-] |
| void agxTerrain::TerrainWheelSettings::setSlipRatioMaxMagnitude | ( | agx::Real | maxMagnitude | ) |
Set the maximum allowed magnitude of the computed slip ratio.
The slip ratio is clamped to [-maxMagnitude, +maxMagnitude] in computeSlipRatio() to prevent extreme values.
| maxMagnitude | Maximum absolute slip ratio [-]. Must be >= 0. |
| void agxTerrain::TerrainWheelSettings::setSlipRatioOmegaYThreshold | ( | agx::Real | omegaYThreshold | ) |
Set the threshold for the wheel axle axis angular velocity magnitude used to suppress slip-ratio computations.
If both:
| omegaYThreshold | Threshold for |omegaY| [rad/s]. Must be >= 0. |
| void agxTerrain::TerrainWheelSettings::setSlipRatioSmoothingAngularSpeed | ( | agx::Real | smoothingAngularSpeed | ) |
Set the minimum velocity scale used to smooth slip-ratio computations.
The slip-ratio expression is smoothly attenuated at very low speeds using a velocity-dependent factor based on smoothingAngularSpeed (see computeSlipRatio()) to avoid numerical issues around standstill. A larger smoothingAngularSpeed implies a greater smoothing.
| smoothingAngularSpeed | Minimum velocity scale [rad/s]. Must be > 0. |
| void agxTerrain::TerrainWheelSettings::setSlipRatioVxAngularEquivalentThreshold | ( | agx::Real | vXAngEquivThreshold | ) |
Set the threshold for the longitudinal wheel velocity expressed as an angular-equivalent velocity used to suppress slip-ratio computations.
The longitudinal velocity vX is converted to an angular equivalent by dividing by the wheel radius R, i.e. |vX| / R.
If both:
The corresponding linear velocity threshold is: |vX| < vXAngEquivThreshold * R
| vXAngEquivThreshold | Threshold for |vX| / R [rad/s]. Must be >= 0. |
|
protected |
Definition at line 596 of file TerrainWheelSettings.h.
|
protected |
Definition at line 612 of file TerrainWheelSettings.h.
|
protected |
Definition at line 599 of file TerrainWheelSettings.h.
|
protected |
Definition at line 598 of file TerrainWheelSettings.h.
|
protected |
Definition at line 597 of file TerrainWheelSettings.h.
Definition at line 600 of file TerrainWheelSettings.h.
|
protected |
Definition at line 611 of file TerrainWheelSettings.h.
|
protected |
Definition at line 610 of file TerrainWheelSettings.h.
|
protected |
Definition at line 609 of file TerrainWheelSettings.h.
|
protected |
Definition at line 608 of file TerrainWheelSettings.h.
|
protected |
Definition at line 606 of file TerrainWheelSettings.h.
|
protected |
Definition at line 607 of file TerrainWheelSettings.h.
|
protected |
Definition at line 605 of file TerrainWheelSettings.h.
|
protected |
Definition at line 604 of file TerrainWheelSettings.h.
|
protected |
Definition at line 602 of file TerrainWheelSettings.h.
|
protected |
Definition at line 603 of file TerrainWheelSettings.h.
|
protected |
Definition at line 601 of file TerrainWheelSettings.h.